The intelligent controller drives two DC motors up to 150 amps each and targets mobile robot and automation applications.
Roboteq Inc. has introduced an intelligent controller capable of driving two DC motors up to 150 amps each at up to 50V. The HDC2450 is targeted at designers of mobile robots, automatic guided vehicles (AGVs), or any other high-power, motor-control application.
The controller accepts commands from analog joystick, standard R/C radio, USB, or RS232 interface. Using the USB or serial port, the HDC2450 can be used to design fully or semi-autonomous robots by connecting it to single-board computers, wireless modems, or Wi-Fi adapters.
The HDC2450 incorporates a Basic language interpreter capable of executing more than 50,000 Basic instructions per second. This feature can be used to write scripts for adding custom functions or for developing automated systems without the need for an external PLC or microcomputer.
The controller’s two channels can be operated independently or combined to set the direction and rotation of a vehicle by coordinating the motors on each side (tank-like steering). The motors may be operated in open- or closed-loop speed or position modes with a 1 kHz update rate. The HDC2450 includes inputs for two Quadrature Encoders up to 250kHz, for precise speed and traveled distance measurement.
The HDC2450 features intelligent current sensing that will automatically limit the power output to 150A in all load conditions. The controller also includes protection against overheat, stall, and short circuits.
The controller includes up to 11 analog, 19 digital, and 6 pulse inputs. Eight 1A digital outputs are provided for activating lights, valves, brakes, or other accessories. The controller’s operation can be optimized using nearly 80 configurable parameters, such as programmable acceleration or deceleration, amps limits, operating voltage range, use of I/O, and more.
A free PC utility is available for configuring, tuning and exercising the motor. The controller can be reprogrammed in the field with the latest features by downloading new operating firmware from Roboteq’s website.
The HDC2450 is housed in a 9.0-inch long by 5.5-inch wide by 1.6-inch high (228mm x 140mm x 40mm) extruded aluminum case, which also serves as a heat sink for its output power stage. The large fin area ensures sufficient heat dissipation for operation without a fan in most applications.
The HDC2450 is available now to customers worldwide at $645 in single quantities, complete with cable and PC-based configuration software. Product information and software can be downloaded from the company’s website at www.roboteq.com.